Sliding Gate Opener

When the sliding gate is fully closed or closing and its position is less than the partial opening position, long press the OPEN button on the remote controller for 2 seconds to enter partial open mode.

The gate will only open to the partial-open position set in menu P-88 of the sliding gate controller.

Enter the menu of the sliding gate opener controller. P-00 adjusts the opening speed and P-01 adjusts the closing speed.

The value ranges from 10 to 100. The higher the value, the faster the speed; the lower the value, the slower the speed.

After the sliding gate fully opened, long press the 【STOP】button on the remote control for 5 seconds to enter Hold-open mode. Press the 【CLOSE】button to cancel this function.

In normal operating state, long-pressing this key triggers second-counting on the digital tube. Releasing the key activates the corresponding shortcut function:

1. Release after a 3-second long press: automatically reverse motor direction.
2. Release after a 6-second long press: quick remote control learning.
3. Long press for 10 seconds: restore factory default settings.